|
Post by comstar on Aug 26, 2023 19:49:02 GMT
Very nice. Here’s mine.
|
|
|
Rhino
Aug 28, 2023 19:37:26 GMT
Post by CTB on Aug 28, 2023 19:37:26 GMT
Will you paint the engine once you have serviced it?
|
|
|
Rhino
Aug 28, 2023 20:06:05 GMT
via mobile
Post by duffer on Aug 28, 2023 20:06:05 GMT
From closer inspection it looks like it was, so yup. I have joined the cx lot, but compared to here, it is a bit slow to get things moving. 😕
|
|
|
Post by duffer on Aug 31, 2023 19:33:16 GMT
|
|
|
Rhino
Aug 31, 2023 21:17:23 GMT
Post by McLellan on Aug 31, 2023 21:17:23 GMT
Nothing like a bit of water sports.
|
|
|
Rhino
Aug 31, 2023 21:18:36 GMT
via mobile
Post by BritPete on Aug 31, 2023 21:18:36 GMT
Fascinating
|
|
|
Rhino
Sept 1, 2023 3:02:23 GMT
Post by CTB on Sept 1, 2023 3:02:23 GMT
Great project keep enjoying it, you only do it once 🤔
|
|
|
Post by duffer on Sept 1, 2023 5:30:27 GMT
Great project keep enjoying it, you only do it once 🤔 Yep. Just like you did.🤣 We both know where this is going....🤣
|
|
|
Post by duffer on Sept 16, 2023 16:22:10 GMT
|
|
|
Rhino
Sept 16, 2023 18:16:06 GMT
Post by buster on Sept 16, 2023 18:16:06 GMT
lovely, so the earlier type cdi ignition (DFS's bike will most likely be the TCI set up, not sure about Carls). BBBikeshop appear to do an exchange stator and pick ups (I'd like to know if the outer pick ups have been rewound). sadly no one seems to do a replacement CDI unit, but there is a firm out there that can repair a bust one, it aint cheap though at about £200. there are other options too, san rae (aussie company) do a replacement pulse signal system utilising a hall effect sensor and a couple of gy6 cdi's (just about every chinese bike on the road has a gy6 engine, if you were wondering) having studied it briefly this aft, I think it looks overly complicated (seems to incorporate the advance in the pick up system, my version would put the advance in a programmable CDI unit) the beauty of that system is it leaves the stator windings to do nothing more than charge the battery and gl650 stators were available brand spanking new for about £70 last time I looked. is that enough to bamboozle for now
|
|
|
Rhino
Sept 16, 2023 18:18:57 GMT
Post by buster on Sept 16, 2023 18:18:57 GMT
just one more quick question, how many pulse magnets are there on the mag wheel/rotor (little brass nobbly bits)?
|
|
|
Post by duffer on Sept 16, 2023 19:41:02 GMT
Just one. I am also nodding sagely at the advice.....natabloodycluewhatyoujustsaid.👍🙄🤣
|
|
|
Rhino
Sept 16, 2023 19:57:33 GMT
Post by buster on Sept 16, 2023 19:57:33 GMT
thats good, keeps the mag wheel reasonably simple
|
|
|
Rhino
Sept 16, 2023 20:06:18 GMT
via mobile
Post by duffer on Sept 16, 2023 20:06:18 GMT
Yes. That's exactly what I was thinking...🙄..honest. 🤪 What could possibly go wrong 👍
|
|
|
Post by duffer on Sept 17, 2023 19:27:56 GMT
|
|