|
Post by duffer on Sept 30, 2022 19:09:08 GMT
|
|
|
Post by BritPete on Sept 30, 2022 19:15:27 GMT
|
|
|
Post by BritPete on Sept 30, 2022 19:15:31 GMT
|
|
|
Post by CTB on Sept 30, 2022 20:21:45 GMT
Keep us all posted on anything you need and hopefully one of us will have it I’m sure.
|
|
|
Post by duffer on Sept 30, 2022 20:40:58 GMT
Keep us all posted on anything you need and hopefully one of us will have it I’m sure. Gelding pliers ?
|
|
|
Post by buster on Oct 2, 2022 15:47:24 GMT
I'll be in among my stock of spares sometime tomorrow, do you need a lower engine casing? I'm thinking I'v got a spare but I may have used it
|
|
|
Post by duffer on Oct 2, 2022 17:54:31 GMT
I do indeed. 👍
|
|
|
Post by buster on Oct 2, 2022 18:11:59 GMT
no probs, I'll have a look tomorrow
|
|
|
Post by duffer on Oct 3, 2022 12:41:09 GMT
I have gratefully received a sump from a 250 engine (many thanks CTB). Am I right to hope that it as a straight swap on the 400 engine ?
|
|
|
Post by BritPete on Oct 3, 2022 13:35:38 GMT
I have gratefully received a sump from a 250 engine (many thanks CTB). Am I right to hope that it as a straight swap on the 400 engine ? Sort of from the part numbers ![](https://i.ibb.co/7X0bcck/591-BE1-C5-E90-E-48-A0-A1-F6-4-A2-B9543697-D.jpg)
|
|
|
Post by buster on Oct 3, 2022 14:14:13 GMT
glad your sorted as I drew a blank in my own spares (only got 450 ones with oil cooler holes) as far as I know the 250 one should just bolt on, might be a different diameter engine mounting bolt depending on year?
|
|
|
Post by duffer on Oct 3, 2022 19:38:37 GMT
Now I have a sump, which will cure the busted and seized engine bolts and the reason the flywheel rusted up. However..... ahemm..... we are not out of the woods, as you can see. ![](https://i.ibb.co/K2SB82m/20221001-133333.jpg) ![](https://i.ibb.co/GcWZjZV/20221001-134502.jpg) ![](https://i.ibb.co/YZt2Hv6/20221001-134509.jpg) This one has been in the hands of a master bodger, and if we remember this was sold as a runner, then also a proper lying bar-stuard. Gasket set ordered for a full strip down and re-build !
|
|
|
Post by duffer on Oct 3, 2022 19:40:30 GMT
And yes, I noticed it has a new front sprocket. Every cloud.....
|
|
|
Post by BritPete on Oct 3, 2022 19:52:46 GMT
It’s got no chain on it
|
|
|
Post by BritPete on Oct 3, 2022 19:52:49 GMT
It’s got no chain on it
|
|