|
Post by johnfcbn44dx on Jul 9, 2021 21:38:35 GMT
45504-410-003 Boot Comp (fits to 8922 models )
|
|
|
Post by BritPete on Jul 10, 2021 3:45:29 GMT
I never knew you could buy those separately
|
|
|
Post by johnfcbn44dx on Jul 10, 2021 7:22:55 GMT
I Came across the number when preparing to refurbish a -KE8- Master Cylinder (VT250FD / VF400F), bought one a while back, then when I needed it last week could not find which safe place I put it in, Silvers had one left on the shelf thankfully. I should have checked if it was the same as the piston kits, but suspect it will be identical. They seem available ok, and I probably need 3 more, plus a spare to complete all my braking kit projects(though technically I have the spare already , it's stash beside one of my brake light banjo fittings that is in hiding as well). That's a couple of things now where the SD part's books have not drilled down with sub-component detail as much as some other parts books. One other example was the stainless clips that fit on the CB400NC caliper brackets, to take the thrust of the pads when the brakes are applied, rather than the alloy face of the brackets taking the load directly. It's part of the bracket part number, but not shown as a separate item.
|
|
|
Post by buster on Jul 10, 2021 8:20:01 GMT
when it fits 8922 models, I wouldnt be surprised if it was still a current part?
|
|
|
Post by johnfcbn44dx on Jul 10, 2021 10:11:54 GMT
it is listed as available (subject to confirmation), last price Y539 (paypal ex rate would apply though) + tax and shipping, maybe I will order a few, when August's pay hits the bank.
|
|
|
Post by BritPete on Jul 10, 2021 12:25:40 GMT
John Are these for 250 or 400 fitting
|
|